< Home

Navigation Tree

The web system consists of five areas: Monitoring, Configuration, Diagnosis, Maintenance, and Network, and provides the following functions: device status overview, interface management, VLAN, DHCP, system management, service management, diagnosis tool, and network deployment.

Table 1 lists submenus in the four areas and describes their functions.

The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

Table 1 Description of the web system menus





Summary (Standalone)

Display the device panel, system description, switch status, top 5 bandwidth usage, logs, and alarms.

Summary (SVF)

Display SVF brief information and switch status.


Display access user information.

Topology (SVF)

Display level-1 AS topology.

Wired Service (SVF)

Display information about AS and user port group.

Wireless Service


Display radio distribution and information.


Display AP distribution, AP statistics, and wired port statistics.


Display SSID and VAP.


Display mesh links and WDS bridge information.

Potential Risk

Display the STAs receiving poor signals and related radio information.


Display detection information about wireless devices and attacked devices.

Spectrum Analysis

Provide spectrum analysis.


Quick Config

Quickly configure switching and routing modes.

SVF Quick Config (SVF)

SVF Enabling

Configure a standalone switch as the parent.

AS Addition

Add ASs to an SVF and configure Fabric-Port.

AS User-Side Service

Configure services on AS user port group.

AP Addition

Add APs to an SVF.

AP User-Side Service

Configure AP services.

Network-Side Service

Allow users to access the external network.

Advanced SVF Config (SVF)

AS Access Mgmt

Add AS blacklist and whitelist and an AS group to an SVF system.

AS Port Group

Add an AS port group to an SVF system.

AS Profile Mgmt

Add AS profiles to an SVF system.

AS Direct Config

Configure ASs on the parent directly.

Basic Services

Interface Settings

Interface configuration includes the following configuration pages: View Configuration, Connect to PC, Connect to IP Phone, Connect to Switch, Connect to Router, Enable/Disable Interface, Port Loopback Test, and Detect Link.

View Transceiver Info

Display optical module information.


Configure and query VLANs, Modify VLANs, and Delete VLANs.


Configure and query DHCP address pool on VLANIF interface, and DHCP relay.

Static Route

Configure static routes.

Advanced Services


Configure MQC.

Voice VLAN

Configure voice VLAN.


Query MAC/IP address table, Configure static MAC address entries, Configure static secure MAC address, Configure blackhole MAC address entries, and Delete MAC address entries function.

IP Services

Configure IP services.

IP Route

Configure IP route.


Configure VRRP.


Configure the loopback detection function.


Configure the STP function.


Configure the LLDP function.

IGMP Snooping

Configure IGMP snooping.

MLD Snooping

Configure MLD snooping.


Configure mirroring.


Configure stack.

Security Services

ACL Config

Configure ACLs.

ACL Reference

Reference ACLs.


Configure AAA.

AAA Service App

Apply AAA.

AAA Profile Mgmt

Provide AAA profile management.


Configure interface ACLs and VLAN ACLs to filter packets.

User Access Control

Configure Authentication Configuration, Portal Server, and Access Configuration to provide security management on the network.

QoS Configuration

Configure QoS.

IP Security

Configure IP security.

Storm Control

Configure storm control.

Port Isolation

Configure port isolation.

Fast WLAN Config (Standalone)


Configure network connections and allow APs to go online.


Configure WLAN service and allow STAs to go online.


Configure the mesh network.

Wireless Services

AC Config

Set CAPWAP parameters and configure radio calibration.

AP Group

Configure AP groups and static load balancing.

AP Config

Add and manage APs.


Configure the WLAN profiles.


Intelligent Diagnosis

Enable intelligent diagnosis for switches, APs, and STAs on WLAN.

One-Click Information Collection

Collect information on a device, including the configuration, logs, and errors.

Wireless Packet Capturing

Obtain wireless packets to locate faults.


Check network connectivity and host reachability.

Trace RouteC

Check the gateways that packets pass through from the source host to the destination host.

AAA Test

Check whether the user can pass the RADIUS authentication.


Check the quality of the link between the AP and STA.


Check connectivity between the AP and network device.

Interference Detection

Check interference detection information on AP radios.

Trace User/AP

Diagnose users or APs and record diagnosis information in a diagnosis file.

Configuration Check

Check the version mapping between the AP and switch, RF parameters, network parameters, and common functions.


System Maintenance


Load license files and display license status.

Restart (Standalone)/Reboot (SVF)

Restart the switch.


Upgrade the system software.

Web File Management

Manage web files.


Upload, install, and uninstall patches.


Display the latest 300 logs.


Display the latest 300 alarms.


Manage web users.


Manage the system, including files, system time, system information, and factory settings recovery.


Configure the SNMP agent function.

Electronic Label

Display elabel information on the switch.


Send performance data to CampusInsight.

AS Interface (SVF)

Display AS interface information.

AP Maintenance

AP Upgrade

Upgrade APs.

AP Restart

Restart APs.


Manage AP logs.


Manage AP accounts.

Device Upgrade

Provide the intelligent device upgrade function.

Network (Standalone)

Role Configuration

Determine the role of a device before configuring EasyDeploy on the device.


Display network topology information and saves the network topology on the device.


Deploy unconfigured devices, replace faulty devices, and perform batch upgrade based on the network topology.

Batch Configuration

Perform batch configuration on the devices by delivering command line scripts to the specified devices.

Power Consumption

Display power consumption of all the devices on the entire network and of each device.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >