< Home

Configuring the Clock Source Selection Mode


If the status or quality of clock sources on a synchronous Ethernet network is prone to fluctuate, you are advised to configure the automatic clock source selection mode to ensure that devices can trace the optimal clock source. You can also manually or forcibly specify the clock source to be traced based on the clock source quality.

Pre-configuration Tasks

Before configuring the clock source selection mode, configure a clock source. For details, see

Configuring a Clock Source.

Configuration Procedure

The following configuration tasks can be performed in any sequence.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >